1. <progress id="y1np7"><track id="y1np7"></track></progress>
        <dd id="y1np7"><noscript id="y1np7"></noscript></dd>
        <span id="y1np7"></span>
        <dd id="y1np7"></dd>
        <rp id="y1np7"><object id="y1np7"><input id="y1np7"></input></object></rp>
        <tbody id="y1np7"></tbody>

        1. <tbody id="y1np7"></tbody>
        2. <button id="y1np7"></button>
          
          

          <dd id="y1np7"><noscript id="y1np7"></noscript></dd>

            <ol id="y1np7"></ol><button id="y1np7"><object id="y1np7"></object></button>
            欢迎您光临济南苏鑫电缆桥架有限公司官方网站!
            联系济南苏鑫电缆桥架有限公司 / Contact us

            济南苏鑫电缆桥架有限公司

            客户统一咨询热线

            0531-85767688

            售后热线:137-0540-5406

            联系基地:山东省 德州市协同发展产业园D06幢

            当前位置:首页 > 新闻中心 > 常见问题 >

            不锈钢电缆桥架选择要注意什么?

            文章来源:http://www.drcrawfordndms.com/?? 作者:电缆桥架厂家?? 发布时间:2022-01-18?? 浏览次数:

            返回:常见问题
            不锈钢电缆桥架被称为是一种智能建筑的弱电系统,它通常有多个信息监控和通信设施,可以独立的放在建筑物的内部,也可以依附在电气的架上。电缆桥架分为三种,分别为槽式电缆桥架、托盘式电缆桥架和梯级式电缆桥架三种,它的选定要根据弱电各个系统缆显的类型、数量来确定。
            Stainless steel cable tray is known as a weak current system of intelligent building. It usually has multiple information monitoring and communication facilities, which can be placed inside the building independently or attached to the electrical frame. There are three kinds of cable trays, namely trough cable tray, tray cable tray and cascade cable tray. Its selection shall be determined according to the type and quantity of cable display of each weak current system.
            一、桥架宽度:根据布放电缆条数、电缆直径及电缆间距来确定电缆桥架的型号、规格,托臂长度,支柱长度、间距,桥架宽度和层数。
            1、 Bridge width: determine the model and specification of cable bridge, bracket length, strut length, spacing, bridge width and layers according to the number of cables laid, cable diameter and cable spacing.
            济南电缆桥架
            二、安装方式:根据场所的设置条件来确定合适的桥架安装方式,如悬吊式、直立式、侧壁式或是混合式,桥架连接件和紧固件一般是配套供应的,根据桥架结构选择相应的盖板。
            2、 Installation method: determine the appropriate bridge installation method according to the setting conditions of the site, such as suspension type, vertical type, side wall type or hybrid type. The bridge connectors and fasteners are generally supplied together, and the corresponding cover plate is selected according to the bridge structure.
            三、架设方向:根据建筑平面布置图,结合空调管线和电气管线等设置情况,以及电缆路由的疏密来确定电缆桥架的Z佳路由。在室内,尽可能沿建筑物的墙、柱、梁及楼板架设。
            3、 Erection direction: determine the z-best route of cable tray according to the building layout plan, combined with the setting of air conditioning pipeline and electrical pipeline, as well as the density of cable route. Indoors, it shall be erected along the walls, columns, beams and floors of the building as far as possible.
            四、施工图纸:应事先绘出电缆桥架平、剖面图,局部部位还应绘出空间图,开列材料表。
            4、 Construction drawings: plan and section drawings of cable tray shall be drawn in advance, and space drawings and material lists shall be drawn for local parts.
            五、荷载计算:事先计算电缆桥架主干线纵断面上单位长度的电缆重量。
            5、 Load calculation: calculate the cable weight per unit length on the longitudinal section of the main line of the cable bridge in advance.
            以上就是今天小编给大家提供的精彩内容,更多的精彩内容请点击进入我们的官方网站:济南电缆桥架http://www.drcrawfordndms.com
            The above is the wonderful content provided by Xiaobian today. For more wonderful content, please click to enter our official website: Jinan cable bridge http://www.drcrawfordndms.com
            工程案例 / Case Show
            • 济南火车站 济南火车站
            • 曲阜孔子文化会展中心 曲阜孔子文化会展中心
            • 山东工艺美院 山东工艺美院
            • 公安厅服务展示 公安厅服务展示
            推荐资讯 / Recommended news
            • 电缆桥架的敷设及布置都有对应要求电缆桥架的敷设及布置都有对应要求

              电缆桥架的敷设Laying of cable tray电缆桥架可与工艺管线一起铺设,不单独占用电缆通道,节省空间,避免与地下管线交叉的问题。The ca

              TIME:2022-05-28
            成在人线av无码免费看_免费中文无码av动作片_韩国青草dj自慰无码AV换脸_小sao货水好多真紧h国产